Baode heat exchanger equipment co.,Ltd
Baode heat exchanger equipment co.,Ltd
Add to Cart
BH100 Stainless Steel Plate and Frame Liquid Cooling Heat Exchanger Gasket Plate Heat Exchanger With High Standard
Gasket plate heat exchanger is a type of heat exchanger. It is characterized by high heat transfer coefficient; Easy to repair and clean; Low fouling coefficient; Compact structure, small footprint, light weight; Easy to change the heat transfer area or process combination; The end temperature difference is small.
Introduction
It is made of a lot of stamped corrugated sheet at a certain interval, sealed by gaskets around, and superimposed by the frame and compression spiral, the four corner holes of the plate and gasket formed a fluid distribution tube and a collection tube, while reasonably separating the hot and cold fluid, so that it flows in the flow channel on both sides of each plate, through the plate for heat exchange.
Working principle
The gasket plate heat exchanger consists of a set of metal plates with four corner holes on the plate for both hot and cold media to pass through. When assembled, A plate and B plate are alternately arranged, a network channel is formed between the plates, and the sealing pad seals the hot and cold media in the heat exchanger, while reasonably separating the hot and cold media without mixing. In the channel, the cold and hot fluid flow at intervals, can be countercurrent or along the flow according to the need, in the flow process of the cold and hot fluid through the wall heat exchange, so as to achieve the desired effect.
| Model | BH100B / BH100H | |
| Cross Reference | M10M, M10B | |
| Height, H [mm] | 1084 | 1084 |
| Width, W [mm] | 470 | 470 |
| Min standard length, L [mm] | 700 | 700 |
| Max standard length, L [mm] | 2300 | 2300 |
| Vertical port distance, VC [mm] | 719 | 719 |
| Horizontal port distance, HC [mm] | 225 | 225 |
| Max temperature [°C] | 180 | 180 |
| Max pressure [barg] | 10 | 16 |
| Flange size | DN100/4'' | DN0100/4'' |
| Max. flow rate [kg/s] | 50 | |
(Measurment in mm, N means the number of the plates)
| Material of Plate | Suited Liquid Kinds | ||
| Stainless Steel (AISI304.316 Etc) | Pure Water, Normal Water, Oil for eating, Mineral Oil | ||
| Ti, Ti-pd | Sea Water, Saline Water, Mineral Water | ||
| 20Cr, 18Ni, 6Mo (254SMO) | Dilute Sulphuric Acid, Organic Water Solution | ||
| Ni | High-temp and concentration caustic soda | ||
| Hastelloy (C276, D205, B2G) | Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid | ||
| Material of Gasket | Operating Temperature ° C | Suited Liquid Kinds | |
| NBR | -15~+135° C | Water, Sea Water, Mineral Oil, Salinous Water | |
| EPDM | -25~+180° C | Hot Water, Steam, Acid, Alkali | |
| F26 | -55~+230° C | Acid, Alkali | |
| TPF | -0~+160° C | High Concentrated Acid, Alkali, High temperature Oil, Steam | |
The gasket plate heat exchanger, with its unique design and efficient performance, has been widely used in various industrial and civil fields. It is highly efficient, compact, lightweight and easy to maintain, making it a leader in modern heat transfer technology.
The biggest feature of the gasket plate heat exchanger is its high efficiency. Due to its unique plate design, the hot and cold fluids flow in a very small flow channel, which greatly improves the heat transfer efficiency. At the same time, due to the turbulent state of the fluid, the heat transfer process is more efficient.
